USA – -(AmmoLand.com)- Buck knives offer a limited edition once-a-month knife that collectors love. This month it is a stylish, classic version of The 55 pocket knife. As always these very limited editions of Buck Knives will sell out really quickly, maybe by the time you read this. Only 500 units! Act fast to get yours.
This exclusive Buck pocket knife model 55, “The 55,” features a smooth polished, BOS heat-treated, S35VN stainless steel clip point blade. Handled with a satin-finished nickel silver frame and red canvas Micarta® inlays and uses hidden rivets unique to this January exclusive. Expertly handcrafted as part of the January 2022 Buck of the Month program. Only 500 made.
Micarta is known for its strength and durability and is nearly impervious to weather, oils, and solvents, making it slip-resistant in wet conditions.
Lockback folding knives have a mechanism that lock the blade in the open position, activated by opening the blade all the way. A lock back gets its name from a rocker (rocking lock bar) partially visible on top of the knife. Opening the blade causes the rocker to lock against the blade so it locks open. Pushing down on the rocker on top of the handle releases it and enables the user to close the blade. Lockbacks require two-hand closing, though some are one-hand openers.
Made in the USA
At Buck, we are proud that this knife is made in the USA. The materials and workmanship involved in creating your knife will be done with the utmost care and will be free of defects.
Paul Bos Heat Treat
We are known for our blades. Buck Knives is a market leader in edge retention thanks to our steel selections and heat treat process pioneered by industry famous, Paul Bos, whose heat treating system has proven to be the best in the business. Each blade is put through a rigorous heat treat process and quality performance test. It is then tempered to the appropriate Rockwell Hardness through a heating, freezing, and reheating system. This gives you longer edge life, ease of resharpening, and a blade that will not fail you.
We warranty each and every Buck knife to be free from defects in material and workmanship for the life of the knife, and we will repair or replace with a new knife, at our option, any Buck knife that is defective. Buck Knives does not warrant its products against normal wear, misuse, or product modifications. Buck Knives are not intended to be used as hammers, chisels, pry bars, or screwdrivers.
- BLADE SHAPE: Clip
- BLADE THICKNESS: 0.084″
- BLADE LENGTH: 2 3/8″ (6 cm)
- WEIGHT: 1.8 oz (54.0 g)
- HANDLE: Canvas Micarta®/nickel silver bolsters
- CARRY SYSTEM: Pocket
- ORIGIN: Made in the USA
About Buck Knives:
Behind every Buck knife is over 100 years of experience and craftsmanship. The very best materials and state-of-the-art technology are used to create knives that meet the exacting demands expected of a high-quality knife. Buck stands behind every knife made with their famous Forever Warranty.
A young Kansas blacksmith apprentice named Hoyt Buck was looking for a better way to temper steel so it would hold an edge longer. His unique approach produced the first Buck Knife in 1902. Hoyt made each knife by hand, using worn-out file blades as raw material. His handiwork was greatly appreciated during World War II. Hoyt’s eldest son Al had relocated from the Pacific Northwest to San Diego California after finishing a stint in the navy a decade earlier. Hoyt, and his wife Daisy, moved in with Al and his young family in 1945 and set up shop as H.H. Buck and Son.
Following the death of his father, Al kept the fledgling custom knife business going until incorporating Buck Knives, Inc. in 1961. Al introduced his son, Chuck, to the knife business at an early age and Chuck and his wife, Lori, were both involved when the company was incorporated. In 1964, the knife industry was revolutionized with the introduction of the Model 110 Folding Hunter, making Buck Knives a leader in the field. A position we hold proudly today.
Chuck worked his way up through the company serving as President and CEO for many years before handing over the reins to his son, CJ, in 1999. Chuck remained active as Chairman of the Board until his passing in 2015. Lori now serves on the Board of Directors and is actively involved with Buck promotional events throughout the U.S., continuing Chuck’s legacy.
CJ, the 4th generation family member to run Buck Knives and current CEO, President, and Chairman, started out with the company on the production line in 1978. He has been quoted saying,
“We have been helping people thrive with reliable and trustworthy edged products for over a century. Since our own name is on the knife, our quality, focus, and attention to detail is very personal.”
Hoyt and Al Buck’s ingenuity may have put the company on the map. But it is our ongoing commitment to developing innovative new products and improving what we have by third and fourth generation Buck family members that have made Buck the successful knife maker it is today. Franky, it’s what our customers expect from a Buck.
Disclosure: Some of the links below are affiliate links, meaning at no additional cost to you, Ammoland will earn a commission if you click through and make a purchase.